New products 2024Wave fins from Maui Ultra Fins

Surf Testteam

 · 20.10.2023

Slim in the tip and with plenty of rake - the new Wave DRL+ model is designed to be particularly manoeuvrable.
Photo: Manuel Vogel
Moreno's turning miracle: The new DTL+ fin model from manufacturer Maui Ultra Fins was developed together with Daida and Iballa Moreno.

The aim was to develop wave fins that are particularly easy to edge and manoeuvre and also offer good control in rough conditions - characteristics that are often desired by smaller and lighter users in particular. The profile has been adapted in the leading edge area, and the fins also offer plenty of flex and a reduced surface area in relation to their length. So is the new model a fin only for lightweights? No, but heavier users should choose fins one size larger if in doubt, recommends Maui Ultra Fins.

The model is made from robust G10 material. The DTL+ fins are also available for all common box systems - including the Starbox/Slotbox2, which is used by Starboard and Severne. For a centre fin (13/14/15/16/17/18), depending on the length, you pay from 49.50 euros, the side fins (8/9/10/11/12) start at 34.50 euros. Further information and ordering at www.mauiultrafins.shop

surf conclusion

The target group for these fins is primarily light users.

The model can also be used in the Slotbox2 from Starboard/Severne.Photo: Manuel VogelThe model can also be used in the Slotbox2 from Starboard/Severne.

Also interesting:

Most read in category Windsurfing